Dayton Wheel Conversion - agents

I'd like to switch to a 22. 5 setup when it comes time to get tires.

If you don't mind keeping the dayton wheels it's cheap and easy to go to 11r or low pro 22. 5.

I acquired a '87 ford l8000 that is in really nice shape except that i hate the looks and.

Tubetype 20″ dayton wheels can be replaced by 22. 5 tubeless dayton wheels without changing any of the mounting hardware & using the same hub.

Those have an inner wheel a spacer ring and an outer wheel.

I have bought a 1984 b60 chevy bus that has dayton style wheels on it with 9. 00 20's and want to swap to 10 r22. 5 tires since the 20's are unobtainum anymore.

Dayton wheel to 10 lug conversion.

You have a gunite hub look here and you will find a conversion request from gunite at the bottom of the page.

This same conversion works for 15″ tubetype going to 17. 5″ tubeless & 22″ tubetype going to 24. 5″ tubeless.

I was blowing tires out every time i used this trailer!

You need 8. 25x22. 5 wheel for 11r22. 5.

Buy a bus with budd wheels and air brakes, and swap in your stick shift if you like.

I just picked up a set of 8. 25x22. 5 rims and will be mounting 11rx22. 5's.

I can't seem to locate a suitable wheel based on a modern conversion.

After 10 years, i decided to upgrade.

Balancing a dayton rim is impossible around the kansas city area using a spin balancing machine.

I have looked at the offerings by accuride but the recommended.

Does anyone know what the options are for converting the hubs on a older chevy medium duty to modern 22. 5 wheels?

Hello gents, i have a 92 ih bus with 22. 5 dayton wheels.

Apparently you can use this center section on.

After researching the possible issues with the dayton style wheels, i have decided that for my peace of mind, i will change out the hubs, wheels and brakes (brakes only on one.

I have a 1986 international s1600 with 9x20's right now.

My question is, how much trouble and at what cost am i looking at to change them over to budds.

This same conversion works for 15″.

📸 Image Gallery

11r22. 5 is direct replacement for 10. 00r20.

If i'm understanding what you want to do correctly you can just take the inside tire off the wheel.

You can upgrade your tire/rim combo to a 22. 5 single piece rim very easily.

There is alot more to converting hubs than just the bearings.

10x20 tires still available here but i just changed to tubeless.

You can still get new dayton rims in the 22. 5 size for about 150 a piece, or you can find set of used.

No one has the adapters to mount the tire on a spin balancer.

If you took the.

Hey all, i am new to this forum but am a diesel mechanic by trade and a driver by choice.

Do you have an old trailer with dayton style (mobile home) hubs?

Tubetype 20″ dayton wheels can be replaced by 22. 5 tubeless dayton wheels without changing any of the mounting hardware & using the same hub.

What do i need to make this work?

Idk that tires will be.

I'm looking to replace both the drives & steering.