โ€” the 350 legend cartridge has made a big splash in a very big pond.

โ€” what is the best barrel twist rate for 350 legend?

Take a look at this chart.

The ideal twist rate for a 350 legend rifle will vary depending on the weight of the bullet being used.

Recommended for you

1 ยท dec 23, 2019.

Going to buy a 350 legend for deer hunting and leaning toward the cva scout td.

You might want to check actual bore/groove diameter of your.

I've searched the cva website and google but cannot find the barrel twist rate stated.

โ€” the same bullets sized down to. 356 work well in my 1:16 legend barrel too, but i haven't tried the factory subs.

Winchesterโ€™s aim was to.

Hornady custom 350 legend 165 grain ftx | hornady american whitetail 350 legend 170 grain interlock |.

    It credits the. 350 legend with 903 ft.

    Itโ€™s a good representation of the scale at which the 350 legend performs at various barrel lengths.

    A twist rate of 1:16 inches is common,.

    The chart below compares how much a 10 mile per hour crosswind impacts those same. 223 remington,. 350 legend, and. 450 bushmaster loads out to 500 yards.

  1. 150 sight ht. :
  2. The general recommendation is a 1:16 twist rate for most 350 legend ammunition , as it provides good stability for a wide range.

    350 legend barrels are typically between 16 to 24 inches.

    For bullets weighing 125 grains or less, a twist rate of 1:16 is recommended.

    Winchester originally developed the. 350 legend cartridge and sent it to market initially in their xpr rifle.

    The general recommendation is a 1:16 twist rate for most 350 legend ammunition , as it provides good stability for a wide range.

    โ€” barrel length and twist rate.

    Jump to a ballistics chart:

    You may also like

    โ€” what is the best barrel twist rate for 350 legend?

    โ€” maximum average pressure (map) = 55,000 psi instrumental velocity*:

    The winchester xpr is the lower cost alternative to the winchester.

    350 legend velocity chart, by barrel length.

    (** velocity based on a 16โ€ test barrel) * refer to ansi/saami z299. 4 for pressure guideline interpretation description.